Toyota 2az Fe Engine Manuals Repair Manuals Toyota 2az fe engine workshop manual toyota repair, owner's manuals, parts manuals, repair manuals, service repair. L4-2.4L (2AZ-FE) (2005) L4-1995cc 2.0L SOHC (2S-E) (1984) L4-1839cc DSL (1CLC) (1985) CE Sedan V6-3.0L (1MZ-FE) (1998) CE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999) CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997) Coupe 2-Door V6-3.0L (1MZ-FE). Download Film Buppah Rahtree Sub Indo.

The Toyota AZ engine family is a straight-4 piston engine series. The AZ series uses an aluminium engine block with cast iron cylinder liners and aluminium DOHC cylinder heads. The engine series features many advanced technologies including slant-squish combustion chambers, offset cylinder and crank centers, and the VVT-i continuously variable intake valve timing system. The aluminium engine measures 626 mm (25-in) long, 608 mm (24-in) wide, and 681 mm (27-in) tall. The cylinder block is an open-deck, midi-skirt die-cast aluminium type with cast-in iron liners and a die-cast aluminium lower crankcase and a stamped oil pan. The forged steel crankshaft is fully balanced with eight counterweights and supported by five main bearings. A helical gear pressed in No.

3 counterweight drives twin contra-rotating balance shafts in the shaft housing within the lower crankcase. The dual overhead camshafts are driven by a single-stage roller chain of 8.0 mm (0.3-in) pitch, enabling a narrow included valve angle of 27.5°. The camshafts act on four valves per cylinder via bucket tappets. As in the recent Toyota engine practice, no clearance adjusting shim is employed. Valve diameters are 34.0 mm (1.3 in) for intake and 29.5 mm (1.2 in) for exhaust, with 8.0 mm (0.3-in) lift for both intake and exhaust.

The four-vane VVT-i device is fitted on the intake camshaft, altering timing by 50°. The valve cover is made of magnesium to save weight. Fuel is injected sequentially via an ultra-fine-atomization injector with twelve small injection holes, each 0.18 mm (0.01 in) in diameter. As in the smaller NZ engine, the new AZ adopts a plastic, built-up, and vibration-welded intake manifold integrating a large volume plenum chamber (3.5 L (214 in3) volume including a 1.3 L (79 in3) resonator).